Products

M35 High Speed Steel Bar (JIS SKH55 / DIN 1.3243)

M35 HSS Bar Overview

M35 is a tungsten-molybdenum-cobalt high speed tool steel covered by ASTM A600, an upgraded grade based on M2 with around 5% cobalt addition. It delivers superior red hardness, higher wear resistance and better high-temperature cutting performance compared with standard M2. M35 high speed steel bar suits high-performance cutting tools for stainless steel, alloy steel and hardened materials, as well as heavy-duty punches and precision wear components.

Supply Condition and Processing Support

We stock M35 high speed steel in round bar, flat bar and forged forms. Our M35 bar is supplied in fully annealed condition, ready for machining before final hardening. Our team supports cut-to-length services for both small and bulk orders. All bars comply with ASTM A600 standard with mill test documentation.

M35 High Speed Steel Bar (JIS SKH55 / DIN 1.3243)

Product Advantages

Processing & Customization

Application Areas

Cutting Tool Blanks

Cutting Tool Blanks

M35 HSS bar turned and ground into drill, tap, end mill and reamer blanks for machining stainless steel, alloy steel and hardened workpieces.
Heavy-Duty Cold Forming Punches

Heavy-Duty Cold Forming Punches

Machined into high-wear punches, blanking dies and forming tools for heavy stamping and cold forging of high strength sheet metal.
High Performance Wear Components

High Performance Wear Components

Hardened and ground into high-load spindles, gauge pins, arbors and wear-resistant parts for precision machinery under high temperature and friction.

Technical Parameters

Item

Typical Information

Product Name

M35 High Speed Steel Bar

Equivalent Grades

AISI M35 / UNS T11335 / JIS SKH55 / DIN 1.3243 / HS6-5-2-5

Product Form

Round bar, flat bar, forged bar, cut piece

Standard Reference

ASTM A600 or customer specification

Supply Condition

Annealed, pre-machined, heat-treated upon request

MOQ

Usually 50KG or negotiable for stock diameters

Application

Cutting tools, cold forming punches, precision wear components

 

Typical Mechanical Properties

Property

Typical Range / Note

Annealed Hardness

Usually ≤255 HBW depending on standard

Hardened Hardness

Often around 64–66 HRC after heat  treatment depending on section size

Key Property

Superior red hardness, wear resistance and high temperature cutting performance

Note

Final values depend on heat treatment process

 

Typical Chemical Composition (%)

C Si Mn Cr Mo W V Co P S
0.80–0.92 ≤0.45 ≤0.40 3.75–4.50 4.50–5.50 5.50–6.75 1.75–2.20 4.50–5.50 ≤0.030 ≤0.030

 

FAQ

 

Q: What is M35 high speed steel and what are its equivalent grades?

A: M35 is a 5% cobalt tungsten-molybdenum high speed tool steel under ASTM A600. Its recognized equivalent grades include JIS SKH55, DIN 1.3243 / HS6-5-2-5 and UNS T11335.

 

Q: What hardness can M35 bar reach after heat treatment?

A: As delivered, M35 bar is supplied fully annealed at no more than 255 HBW for machining. After proper quenching and triple tempering, it commonly reaches 64 to 66 HRC, depending on section size and heat treatment practice.

 

Q: What is the main difference between M2 and M35 high speed steel?

A: M35 adds around 5% cobalt on the basis of M2, which improves red hardness and wear resistance at high cutting temperatures. M35 lasts longer when machining hard materials, but comes at a higher material cost.

 

Q: What supply conditions and forms are available?

A: We supply M35 high speed steel bar in hot rolled, forged and bright annealed conditions, available as round bar, flat bar and forged sections. Custom cut lengths are available on request.

 

Q: What applications is M35 high speed steel bar used for?

A: M35 bar is mainly used for high-performance cutting tools, heavy-duty cold forming punches and dies, and high-load precision wear components under demanding service.

Related Products

Send Message

      Copyright © Shanghai Shengxi Iron and Steel Group Co., Ltd.

      Home Tel Mail Inquiry